How to Check Car Fuses (2024)

How to Check Car Fuses (1)Time

An hour or less

How to Check Car Fuses (2)Complexity

Beginner

How to Check Car Fuses (3)Cost

Less than $20

Introduction

Cars run on electricity as well as gas, and almost all of it runs through fuses. Learn where they are, how to spot a blown fuse, and how to replace them. It takes about five minutes, costs about $1, and it'll save you the hassle of a trip to the repair shop.

Cars run on electricity as well as gas, and almost all of it runs through fuses. Eventually, those fuses blow and need to be replaced. Know that next time your car radio, windshield wipers or other device stops working, chances are a blown fuse is the culprit. The good news is that checking and replacing a car fuse is simple enough for any DIYer to take on the project and save time and money.

Car fuses are color-coded by amp rating. For example, a standard blue fuse has a 15-amp rating, while yellow is 20 amps and green is 30. Before buying and replacing car fuses, remember that the fuse panel cover often contains spare fuses and even a fuse puller. If you do use those spares, be sure to replace them. You can buy car fuses at any auto parts store and at well-stocked service stations. The location of a vehicle’s fuse panel varies, so refer to your owner’s manual to locate yours. Some standard locations for fuse boxes include under the dash, beneath the sidekick panels and under the rear seat.

A professionalcar mechanicis not required to replace a car fuse; however, if your new fuse blows soon after installing it, you might have problems with that circuit. Schedule an appointment with your service station or dealer for an expert diagnosis to repair the problem.

  • Fuse puller

Materials Required

  • Replacement fuses

Watch How to Check and Replace Car Fuses

Project step-by-step (8)

Step 1

Turn off the vehicle

Shut off the vehicle by turning off the ignition.

Step 2

Locate the car fuse panel

Check your owner’s manual to locate your fuse panel. Once located, remove the cover and look for a fuse diagram.

How to Check Car Fuses (4)TMB STUDIO

Sign Up For Our Newsletter

Complete DIY projects like a pro! Sign up for our newsletter!

Do It Right, Do It Yourself!

Step 3

Analyze the fuse diagram

Each fuse panel cover should have a diagram listing each device and the corresponding fuse. The diagram will make it easy to find which fuse needs to be replaced to fix the electrical issue.

How to Check Car Fuses (6)TMB STUDIO

Step 4

Remove the blown fuse

With the fuse puller, remove the blown fuse from the panel. Tweezers, needle nose pliers, or your fingers would also work to pull out the fuse. If you have larger hands, it will be easier to use fuse pullers.

How to Check Car Fuses (7)TMB STUDIO

Step 5

How to chack if a car fuse is blown

To confirm a fuse is blown, hold it up to the light to see if it’s burned out. If the fuse is good, you’ll see a fine wire element connecting the two sides. The fuse is bad if a section of that wire has burned away.

How to Check Car Fuses (8)TMB STUDIO

Step 6

Replace the fuse

Replace the blown fuse with a new fuse that has identical amperage, identified by the color and number printed on the fuse. Use the fuse pullers to insert a new fuse into the fuse panel.

How to Check Car Fuses (9)TMB STUDIO

Step 7

Test the new fuse

Turn the vehicle back on. Turn on the electrical circuit that corresponds to the replaced fuse. If it works, you are good to go. If the new fuse blows immediately, you know an underlying issue (like a short circuit) needs to be inspected by a professional mechanic.

Step 8

FAQs

How do you know if a car fuse is blown?

Common signs that a fuse in your car is blown are electrical functions not working, including interior or exterior lighting systems, power outlets,power windows, power door locks, or the radio.

Can you replace a blown fuse with a lower AMP fuse?

Always replace the fuse with one with the specified amp rating. You may install the next-smaller-rated fuse to get you by in a pinch until you can purchase a replacement. However, you should never replace a blown fuse with a higher-amp fuse.

What are common types of car fuses?

There are at least seven different styles of fuses. You’ll need the blown fuse to match it up with the right replacement. Most automobile fuses used in vehicles today are one of three types: mini, standard, or maxi. The mini and standard are fast-acting fuses that protect most of your vehicle’s circuits, including those for lights and radios. The maxi car fuses are slow-acting fuses that protect circuits with a large current draw, such as those for anti-lock brakes, the rear window defoggerand traction control.

Author

Samuel Rosenmayer

Hands-on DIY woodworker with experience in the utility construction industry.

Read More

How to Check Car Fuses (10)

How to Check Car Fuses (2024)
Top Articles
Latest Posts
Recommended Articles
Article information

Author: Otha Schamberger

Last Updated:

Views: 5576

Rating: 4.4 / 5 (55 voted)

Reviews: 94% of readers found this page helpful

Author information

Name: Otha Schamberger

Birthday: 1999-08-15

Address: Suite 490 606 Hammes Ferry, Carterhaven, IL 62290

Phone: +8557035444877

Job: Forward IT Agent

Hobby: Fishing, Flying, Jewelry making, Digital arts, Sand art, Parkour, tabletop games

Introduction: My name is Otha Schamberger, I am a vast, good, healthy, cheerful, energetic, gorgeous, magnificent person who loves writing and wants to share my knowledge and understanding with you.